HEADLIGHT VISORS
Available for 7 inch and 5 3/4 inch headlights
CHROME PLATED
11.95
5 3/4 inch Model
9.95
7 inch Model
Click "Index Main" to go to Main Catalog if you are not on a fames page already.
CRC2 NEW PARTS CATALOG
CHOPPER PARTS AND CHROME GOODIES
| Chopper Index Page 1 2 3 |
All items on this page are currently IN STOCK unless stated "out of stock" or "Special Order".
|
|
HEADLIGHT VISORS Available for 7 inch and 5 3/4 inch headlights CHROME PLATED |
|
11.95 5 3/4 inch Model |
|
|
9.95 7 inch Model |
Sparto Style Tail Light |
|
|
|
Sparto Style Tail Light |
| Cool polished aluminum Sparto style tail light/brake light assembly. Comes with a un-drilled four inch long tab for custom mounting license plate or signals. The ultimate in vintage tail-light design. Uses a dual element incandescent bulb. | |
|
39.95 |
|
  |
Slim Cat Eye Tail Light With License Plate Mount |
| 6 1/2 inches long, 1 1/2 inches tall, 1 1/2 inches deep. Plastic body with beautiful chrome finish. 2 inch wide bolt studs on rear. Comes with aluminum license plate mount that can be mounted on a fender or any number of ways. Uses a dual element incandescent bulb. | |
|
39.95 |
|
|
|
Handlebar Clamp |
| This is a beautiful chromed handlebar clamp that fits many early Honda and Kawasaki's. Clamp fits most CB350's-GL1100's from '69-'83 and Kawasaki KZ400-1100's '73-'83. Comes with mounting bolts. | |
|
27.95 |
|
|
|
Replacement Gauge Cups for Kawasaki CHROME!!! |
| Fits
KZ650 '77-'80
KZ750 Twin '76-'80 KZ900 '73-'76 KZ1000 '77-'80 |
|
|
Golf Club Mirror |
|
One of the coolest mirrors out there. They have a cool streamlined look and have some weight so they have minimal, if any vibration. Mirrors sit appr 9 inches horizontal and 5 inches vertically. Mirror surface appr 1 1/2 x 4 inches. The best part is they come with the adapters to fit ALL major brands of bikes. Honda, Harley, Kawasaki, Suzuki, and the elusive Yamaha fit TOO!!! Beautiful chrome finish and great visibility for the size. |
|
|
114.95 a PAIR |
|
|
|
Pro One Billet Tear Drop Mirror |
| Beautiful Billet Tear drop style mirrors made by Pro One. appr 4x2.5 inch mirror surface. Comes with two different stem lengths and all the adapters for Honda, Kawasaki, Suzuki, Yamaha, and Harley applications. Nice and heavy to absorb shock and make for a clean view with little to no vibration. | |
|
99.95 a PAIR |
|
|
|
Maltese Cross with Billet Style Shaft |
| Cool looking Maltese Cross mirror with aluminum sculptured shafts and cast aluminum backs. Nice and heavy for low vibration and good visibility. Mirror is appr 4 inch x 4 inch and 6 inch shafts that sit at a 45 degree angle. Sold in Pairs. The best part is they come with the adapters to fit ALL major brands of bikes. Honda, Harley, Kawasaki, Suzuki, if you have a Yamaha Order the Yamaha Pair | |
|
54.95 a PAIR Hon Kaw Suz Harley |
|
| 54.95 a PAIR Yamaha | |
| MINI TACHOMETER and SPEEDOMETER | |
|
Handlebar mount clamp also included, but not pictured. |
|
| Here they are! The original style polished stainless steel bezel and chrome body mini speedometers and mini tachometers with cable drives. Speedo's register 140 mph and the tach's register 12000 rpm. They have black faces and light up with typical halo lighting with a replaceable bulb. The cable hook-up is the same as ALL major Japanese models early to present day. Sold individually below and available in different ratios. They all are appr 2 1/2 inch diameter (60mm) and are appr 3 inches long bodies. For some models you will need to do some research to figure out the proper ratio's needed. Most Japanese bikes use 1:2 and 60:2240 for 21 inch wheels. | |
| MINI TACH Most small Honda's up to 550cc 1:7 Ratio | |
| MINI TACH Most Honda's 750-1100cc and Suzuki's 1:4 Ratio | |
| MINI TACH Most Kawasaki's and Yamaha's 1:5 Ratio | |
| MINI SPEEDO 1:2 Ratio | |
| MINI
SPEEDO
2240:60 Ratio |
|
| NEW! | |
|
|
Mini Speedo with Indicator Lights Black face
|
| This is a 60 mm size mini speedo made just like the ones sold above this add with the exception of the addition of 4 indicator lights built in. Now you can kill two birds with one stone and have a oil light, neutral light, signal indicator, and high beam indicator built right in!! Special order item adds 3-4 business days to delivery time. | |
| Mini Gauge w/4 LED Ind 1:2 Ratio | |
| Mini Gauge w/4 LED Ind 2240:60 Ratio | |
|
|
Mini Speedo with Indicator Lights White face |
| This is a 60 mm size mini speedo made just like the ones sold above this add with the exception of the addition of 4 indicator lights built in. Now you can kill two birds with one stone and have a oil light, neutral light, signal indicator, and high beam indicator built right in!! Special order item adds 3-4 business days to delivery time. | |
| Mini Gauge w/4 LED Ind 1:2 Ratio | |
|
Mini Gauge w/4 LED Ind 2240:60 Ratio |
|
  |
Vintage Tail Light |
| This is a cool vintage style tail light assembly. Base grounded with two hot leads, one for tail and one for brake light. Nuts screw onto threads on the back for mounting 60mm center to center. Total width appr 3.5 inches and 3 3/16 height, and appr 2 1/2 inches deep. Has clear spot in lens on bottom for license plate lighting. | |
|
Complete Light Assembly |
|
|
|
|
|
|
Maltese Cross Light |
| Chrome
plated cast metal body. The REAL DEAL! Dual element tail light assy.
Extra lens sold seperatly Uses a dual element incandescent bulb. |
|
|
Complete Light Assy |
|
|
Lens Only |
|
|
|
Tombstone Tail Light Classic Look! |
| Traditional shape and size classic tombstone tail light. Heavy cast with beautiful show chrome finish. Uses a dual element incandescent bulb. | |
|
59.95 |
|
|
|
CB750 Drag Pipes |
| 4-4
Drag pipes for CB750K Honda's 69-'76 and '77-'78
FACTORY EXHAUST FLANGES ARE NEEDED FOR INSTALLATION |
|
|
CB750 Honda '69-'76
309.95 |
|
|
CB750 Honda '77-'78 309.95 |
|
 |
CYCLE Header Wrap |
| Withstands heat up to 2000 F Degrees 2 inch wide and 25 ft long and comes with four stainless ties. Available in natural as shown or black. | |
| Natural 2" x 25'
With 4 Stainless Ties! |
|
| Black 2" x 25'
With 4 Stainless Ties! |
|
 |
Chrome Cap Nuts |
| We
carry these in 3 sizes.
10mm thread with 14mm head 8mm thread with 12mm head 6mm thread with 10mm head Also see out Hardware Page for More. |
|
| 10mm thread .75 cents each | |
| 8mm thread .60 cents each | |
| 6mm thread .50 cents each | |
| 9 INCH SOLO SEAT | |
 |
 |
|
Solo Seat 9" wide with universal mount hardware. Can be mounted with springs listed below. |
|
|
34.95 |
|
| 13 INCH SOLO SEAT | |
|
|
|
| Larger Solo Seat Vinyl and riveted cover with heavy 16 gauge steel pan. Spring mounts and slotted front mount welded to pan. Approximately 13 inches wide and 15 inches long. Very nice contour makes this a quality solo seat at a great price. | |
|
59.95 |
|
|
|
3 inch Solo Seat Spring. Sold individually for 6.95 each. |
|
6.95 each
|
| OTHER SOLO SEAT ACCESSORIES | |
|
Universal solo seat spring mount. 7 1/4" and 6 1/2" on center holes pre- drilled PAINTED BLACK |
4.95 |
|
Universal solo seat front mount. Appr 6 inches long with 1 1/2 inch slot. CHROME PLATED |
|
|
Universal solo seat front mount. Appr 4 inches long with 1 1/2 inch slot. CHROME PLATED |
5.95 |
|
|
Pod Filters |
|
These are a great replacements for air boxes on most bikes. Usually a re-jeting of two sizes up on the main jets is needed on 3 and 4 cylinder bikes. Sold in 35-39-42-48-52-54mm sizes |
|
|
EK 530ZVX2 (10,560 tensile) o-ring |
|
|
|
CHROME CHAIN EK530 ZVX2 O-RING CHAIN WITH CHROME PLATING. Special Order item, extra 2-4 days delivery time. |
|
Quadra-X ring design increases wear life and reduces friction by as much as 40% for maximum engine performance 10,560 lbs. Tensile Strength! |
|
| 10,560 TENSILE STRENGTH AND MADE FOR HEAVY DUTY APPLICATIONS AND RACING. THIS IS ONE OF THE BEST 530 SEALED CHAINS (0-Ring) AVAILABLE AND IT'S NICKEL CHROME PLATED!!! Comes in 530 only and is available up to 160 links. Comes with a peen-on master link. | |
|
110Links
- 189.95 |
|
|
Rivit (peen style) Master link for Chrome EK530-ZVX Chain.
8.95 each |
|
|
Clip-Type Master link for Chrome EK530-MVX Chain. Makes overall Tensile
9300lbs. For highest strength use Rivet style
8.95 each |
|
 |
16"X 3.0"
Rim for 40 spoke hubs. Works with 16" spoke conversion kits for 40
spoke sets Like CB750 Choppers.
Special order item adds 3-4 business days to delivery time. |
| Rim only....................................79.95 | |
| Rubber rim Band..........................2.00 | |
| 16" Intertube RSV.....................15.95 |
|
|
Lucas Style Taillight |
| Popular small replacement tail light. Appr 4" wide Uses a dual element incandescent bulb. | |
|
Light assy 17.95 |
|
|
|
Cat Face Tail Light |
| This is for the person who is looking for the ultimate unique tail light. It has a cool lens in the shape of a cat's face! Why just have a cat eye when you can have the whole face?! Made with the same back as a classic Lucas sport light. Dual element full function tail light/brake light. The blue backing is just a cover for the stainless steel back. Uses a dual element incandescent bulb. | |
|
19.95 |
|
|
Chrome Sport Tail Light and Mount |
| This is a classic style sport tail light/brake light with chrome mount that fits most rear fenders. 3 bolt mount and comes with rubber base gasket. 4 inch x 1 inch tab on rear to use for mounting license plate, un-drilled so you can use the plate elsewhere if you like. You can also use he Lucas tail light or the cat face light with this unit. Comes with the light shown which is the sport version of the Lucas style light.Uses a dual element incandescent bulb. | |
|
44.95 |
|
 |
Custom Rectangle Taillight Cast Metal |
| Awesome old school cast metal rectangular tail light. Appr 4x2x2 inches. Beautiful chrome plating and has a clear bottom lens to light up a license plate. Dual element for use as a tail light/brake light. Uses a dual element incandescent bulb. | |
|
34.95 |
|
|
|
Side Mount Taillight |
|
Complete side mount assembly with taillight, license plate mount. Mounts on left side of axel. Uses Lucas style light. Uses a dual element incandescent bulb. |
|
|
54.95 |
|
|
|
Mounting Bullets |
| Used for mounting license plates, windshields and other accessories. | |
| Chrome....... 1.00 ea. | |
| Gold............ 1.50 ea. | |
| Rocket........ 1.95 ea. | |
| Universal Throttle for 7/8 inch Bars | |
 |
 |
| SAME Throttle works for Push/Pull or just Pull type Throttle. Has chrome metal housing and plastic throttle sleeve. Works with most early Honda throttle cables '68-up. This is the ultimate throttle for CB750 choppers! Allen wrench included. | |
|
21.95 |
|
|
|
Black Mini Signals |
|
14.95 pair |
|
|
BULB ONLY For Lights Above
Mini Bulb Clear Single Element |
|
|
|
Aluminum Mini Signals dual element. |
|
24.95 pair |
|
|
BULB ONLY For Lights Above
Medium Bulb Clear Dual Element |
| Cool looking mini light made to work as a custom turn signal. Single element and very bright. Appr 1 1/4 high , 2 1/2 long body, and a 3/4 inch mounting shank with 10mm threads. | |
|
Sold in Pairs |
Cat Eye Signal Amber Lens |
|
BULB ONLY For Lights Above
Mini Bulb Clear Single Element |
|
|
Sold in Pairs |
Cat Eye Signal Clear Lens |
|
BULB ONLY For Lights Above
Mini Bulb Amber Single Element for use with clear lens type signals |
|
| Cool looking mini light made to work as a custom turn signal. Single element and very bright. Appr 1 1/4 high , 2 1/2 long body, and a 3/4 inch mounting shank with 10mm threads. | |
|
Sold in Pairs |
CHROME!! Cat Eye Signal Amber Lens |
|
BULB ONLY For Lights Above
Mini Bulb Clear Single Element |
|
| Chopper Index Page 1 2 3 |
Page and Contents © 2011 crc2onlinecatalog.com
