GL Carb Parts

[ Index main ] [ Search ] [ Tools Tips ] View cart

CRC2 NEW PARTS CATALOG

Miscellaneous Carb Parts for GL Models (top)

Additional O-Rings for Other Bikes (bottom)

All O-Rings MADE IN JAPAN

Viton® Rubber for the best fuel sealing quality.

Manifold O-rings

GL1000/1100 '75-'83

This is the o-ring that seals the intake manifold to the head

Manifold O-rings

GL1200 '84-'87

This is the o-ring that seals the intake manifold to the head

Carb Parts

GL1000 '75-'79

Fuel mixture screw 2.8mm I.D. X 1.9mm o-ring

GL1100 '80-'83

Fuel mixture screw 2.8mm I.D. x 1.3mm thick o-ring

GL1100 '80-'83

Fuel tube crossover pipe (small) 2.8mm I.D. x 1.3mm thick o-ring

GL1100 '80-'83

Fuel tube crossover pipe (Large) 5.8mm I.D. X 1.9mm o-ring

GL1000 '75-'79

Float Seat 5.7mm I.D. X 1.3mm o-ring

GL1000 '75-'79

Bowl drain screw 4.47mm I.D. X 1.78mm o-ring

GL1000 '75-'79

Primary Jet 3.2mm I.D. X 1.1mm o-ring

This is the o-ring for the smaller of the two push-in jets

*NEW!*
	*Primary Jet* *GL1000 '75-'79*
This is the smaller of the two push-in type jets in a GL1000 carb. Comes in sizes from #65-#92
*3.25 each*	Size:

GL1000 '75-'79

Secondary Jet 4.2mm I.D. X 1.1mm o-ring

This is the o-ring for the larger of the two push-in jets

Secondary Jet

GL1000 '75-'79

This is the larger of the two push-in type jets in a GL1000 carb. Comes in sizes from #98-#150

3.25 each

Float Needle

GL1000 '75-'79

#8954 6.95

Float Needle

GL1100 '80-'83

#8955 6.95

GL1100 '80-'83

O-ring 6.9mm I.D. X 1.3mm

GL1100 '80-'83

O-ring 4.8mm I.D. x 1.9mm

GL1000 '75-'79

Bowl Gasket

GL1100 '80-'83

Bowl Gasket

GL1000 Carb passage plug (over idle jet)

Looks like a little rubber top hat and it seals the idle jet cavity. Very critical part to the idle circuit working properly.

GL1000 air cut-off valve kit

Example of part

Mounts to the top of the carb plenum. GL1000 only uses one total.

GL1100 air cut off valve kit

Example of part

Mounts to the side of each carb. GL1100's use one per carb (set of 4 needed for one bike)

Bowl Screws 4mm x 16mm

Zinc oxide plated carb bowl screw.

U-Rings are o-rings that have a oval or square shape cross section instead of a total round cross section. Below are some different U-Rings we can supply.

U-Ring

#4642

This is a specific o-ring used in some Kei-Hin Carbs. You should be able to determine if your carb uses it by the shape alone as it only comes in this one size in all carbs that use it.

1.09 each

U-Ring

#4643

Used to seal the small channel on the air cut-off valve cover on Kei-Hin carbs. Has a sharp edge and is 2 x 3 x 5.2mm

1.49 each

U-Ring

#4644

Used on Kei-Hin carbs and has rounded edges. 4 x 6.3 x 2mm

1.49 each

U-Ring

#4645

Used on Kei-Hin carbs and has rounded edges. 6.5 x 9.5 x 3mm

1.59 each

*Various O-Rings Specific to Mikuni Carbs*
The o-rings below are all Mikuni sizes, but we added the dimensions so you can determine if they may work for other uses on different brand carbs. Made of Viton® Rubber for specific fuel related uses. Sizes are given in I.D. (Inside diameter) x Thickness
*4.0mm x 1.0 mm*	#4630	*0.50 each*
*7.5mm x 1.5 mm*	#4631	*0.50 each*
*3.0mm x 1.0 mm*	#4632	*0.50 each*
*5.7mm x 1.3 mm*	#4602	*0.50 each*
*3.7mm x 1.8 mm*	#4634	*0.50 each*
*4.8mm x 1.9 mm*	#4635	*0.50 each*
*2.4mm x 1.6 mm*	#4636	*0.50 each*
*10.2mm x 1.4 mm*	#4637	*0.60 each*
*6.6mm x 1.5 mm*	#4638	*0.50 each*
*2.7mm x 2.0 mm*	#4639	*0.50 each*

[ Index main ] [ Search ] [ Tools Tips ] View cart