CRC2 NEW PARTS CATALOG
|
VARIOUS SEAL KITS |
||
|
|
||
|
Most oil seal kits come with the following seals; crank seals, shifter seal, tach seal, kicker seal, push rod seal, and countershaft seal. |
||
|
HONDA |
CB400/4 SS '76-'77 14.95 |
|
| HONDA |
CB750 '79-'82 CB900F '80-'82 DOHC 34.95 |
|
| KAWASAKI | ![]() |
| Japanese made quality engine oil seal kit. Counter shaft, shifter, ignition, kicker, tach, and push rod seals included. | |
|
Fits all of these models and years.
Z1-900 '73-'75 KZ900 '76 KZ1000 '77-'80 |
|
SUZUKI |
|
|
Japanese made quality engine oil seal kit. Counter shaft, shifter, ignition, and push rod seals included. |
|
| Fits all of these models and years.
GSX600F '88-'03 KATANA GSF600F '96-'03 BANDIT GSX750F '89-'03 KATANA GSXR750 '86-'87 GSXR1100 '86-'92 GSF1200F '97-'03 BANDIT
|
|
|
Fits most Kawasaki's '81 and earlier 4 cylinders with mechanical tachs |
| Fixes oil leak problems where the tach cable attaches to the motor. | |
| Oil seal ONLY - 2.95 | |
| Kit As Pictured - 22.95 | |
| WATERPUMP
SEAL KITS
Contains all gaskets, o-rings, and seals needed to install a new water pump in the listed models |
||
|
|
||
|
HONDA |
GL1000/1100 ALL 24.95 |
|
|
HONDA |
GL1200 ALL 24.95 |
|
|
Both seals come
with kit |
Water Pump Mechanical Seal Set CX500 '78-'82 GL500 '81-'82 Be sure to FREEZE this part for installation or it may be damaged upon installation. Freezing shrinks the part for correct installation due to the interference tolerance. Warming or SLIGHTLY heating the cover can help too, but do not heat with torch or too high temp or the seal may be damaged. |
|
24.95 |
|
|
The seal kit above also fits the following models of bikes below. Honda Yamaha |
|
|
CAM END SEALS (HALF MOONS) >>>>>sold each<<<<< |
||
|
KAWASAKI |
KZ550/650/750/4
2.50ea |
|
KAWASAKI |
KZ900/1000 '73-'80 2.50ea |
|
KAWASAKI |
KZ1000/1100 '81-'85
(ALL RUBBER)
5.00ea |
|
KAWASAKI |
KZ1000/1100 '81-'85
(ALUMINUM SIDES)
5.00ea |
|
|
SUZUKI |
GS MODELS ALL
2.50ea |
|
|
YAMAHA |
XS MODELS ALL
2.50ea |
|
"ALL" means all models that have cam end rubbers.
|
VALVE COVER BOLT SEALS (SOLD EACH) |
||
|
HONDA |
CB750/900/1000/1100 MODELS '79-'83
VTR250,VF500,CB65081-'82, 2.50ea |
|
|
HONDA |
GL1000,GL1100 '75-'83
CM185,CM200,CB250SC, CM250,CMX250,CX500, GL500,CX650,GL650 2.50ea |
|
|
|
VT500C Shadow All VT500FT Ascot All VT600C '88-'00 NT650 Hawk GT All VF700C Magna All VF750C Magna '82-'88 VF700S Sabre All VF750S Sabre All VF700F Interceptor All (Not VFR) VF750F Interceptor '83-'84 (Not VFR) VF1000 Interceptor '84-'86 VF1100C Magna All VF1100S Sabre All GL1200 Goldwings All GL1500 Goldwings All GL1500 Valkyrie All |
|
|
SUZUKI |
GSF400,GSF600,GSX600F,GSXR600,
RF600,GSX750F,GSXR750,RF900,
GSXR1000,TL1000,GSX1100F,
GSXR1100,GS1150,GSF1200,GV1200,
GSX1300,GV1400 ALL
YEARS OF ALL THESE MODELS LISTED!!
2.00ea |
|
|
Outer Seal Inner Seal YAMAHA |
Outer Bolt Seal (bolts on outer ends only)
XJ550 '81-'83,XJ650 '82-'83, XJ700 Maxim '85-'86,XJ750 '82-'83 All of these bikes listed in this box use Seal 0154 as the inner seal (center 4 bolts on valve cover) and Seal 0152 as the outer seal (8 outer bolts on the ends of the valve cover) 2.25 Each |
Outer Seal |
|
Inner Seal |
||
|
YAMAHA |
SRX250,FZR400,FZR600,YZF600R(NOT
R6),FZ700, FZX700 Fazer,XJ700 MaximX, FZ750,
FZR750,YZF750R, TDM850,XJ900,FZR1000,GTS1000,
YZF1000R(NOT R1),FJ1100, FJ1200,V-Max,
Venture 1200/1300
Fits ALL Years of the bikes listed in this box! 2.25 Each |
|
|
YAMAHA |
XZ550 Vision, FJ600,FZ600,YX600
Radian
Fits ALL Years of the bikes listed in this box! 2.25 Each |
|
Page and Contents © 2002 crc2onlinecatalog.com