Index main ] Search ] Tools Tips ]

CRC2 NEW PARTS CATALOG

Tire Accessories

Tube Reference Chart
MCV=Metal Center valve All metal valve centered on the rim. Most common. Also Called TR-6  Most common and is the default style if not listed otherwise in the list of tubes we sell. 
MSV= Metal Side Valve All metal valve offset from the rim center. Also Called TR-6 Fairly uncommon to Japanese bikes, mostly seen on later model Harley mag style wheels.
RSV=Rubber Side Valve Wide bottom all rubber stem centered on the rim. Also Called TR-15 Very common to old style Harley 16 inch wheels and Japanese replica laced wheels. Can see a large hole in wheel for valve stem that is off to the side if the wheel center. Usually only seen on 15 and 16 inch laced wheels.
RCV=Rubber Center Valve Wide bottom all rubber stem offset from the rim center. Also Called TR-15 Not real common, usually seen on early Kawasaki Mag wheels that have a very large hole centered on wheel where valve stem protrudes wheel center. Seen mosly '76-'80 Kaw Mag rear wheels.
MCE=Metal Center Elbowed Elbowed, all metal stem centered on the rim. Also Called TR-87C Common to new Metric Cruisers that come with laced wheels. The elbowed valve stem allows for easier access on these large wheeled bikes. 

 

Size Conversion Chart
Most inner tubes are sized with American inch measurements. This is a chart that will help you determine the size needed to match your metric sized tire size. The number in red in the following example is the referenced numbers listed in the right side column    Example  100/90-19 (you order 3.25-3.50-19)
Tube Size Range Tire Size 
2.75-3.00 90
3.25-3.50 100
3.75-4.00 110
4.25-4.75 120
5.10-5.50 130-150

 

 

Intertubes
5.00/5.50-15 MSV

14.95

5.00/5.50-15 RSV

14.95

5.00/5.50-15 MCV

14.95

5.00/5.50-15 RCV

14.95

170/80-15 MCE

29.95

140/80,160/80-16 RCV

29.95

4.25/4.60-16 MCV

9.95

5.00/5.10-16 MCV

14.95

5.00/5.10-16 MSV

14.95

5.00/5.10-16 RSV

14.95

5.00/5.10-16 RCV

14.95

3.25/3.50-17 MCV

9.95

4.00/4.25-17 MCV

10.95

4.50/5.10-17 MCV

14.95

5.00/5.30-17 MCV

14.95

2.75/3.00-18 MCV

9.95

3.25/3.50-18 MCV

9.95

3.50/4.00-18 MCV

9.95

4.00/4.50-18 MCV

11.95

4.50/5.10-18 MCV

11.95

5.00/5.30-18 MCV

15.95

2.75/3.00-19 MCV

9.95

3.25/3.50-19 MCV

11.95

3.50/4.00-19 MCV

11.95

2.75/3.00-21 MCV

9.95

 

Rim Bands

15 Inch

1.95

16 Inch

1.95

16 Inch Side Stem

1.95

17 Inch

1.95

18 Inch

1.95

19 Inch

1.95

21 Inch
1.95

 

 

8 Inch Economy Tire Tool

4.95 each

 

 

Valve Stem Caps

Decorator valve stem caps are sold separately.

diceca~1.gif (10859 bytes) Dice

Color:

 

2.99 a pair

 

 

Economy Rear Stand

Universal Spool Type Rear Stand  

Universal Front Stand

Optional Non-Spool Holders for Rear Stand

All steel construction, powder coated white. Comes with universal spool type holders. Optional non spool holders available separately below. Front stand works with most conventional front ends. UPS Ground Shipping Only.
Universal Spool Type Rear Stand

59.95

Universal Front Stand

54.95

Optional Non-Spool Hardware

19.95

 

Pictured with spool Adapters installed.

Swing Arm Stand

A versatile shop tool that works with standard and button type swingarms. Fully adjustable platforms with thick rubber padding, or spool mounts make this stand safe and easy to use. The 1-1/2" tubing is strong for many years of trouble free service.
Rear Stand

with spool type and platform mounts

 

209.95

Ships directly from manufacturer

 

Front End Stand

This heavy duty front end stand from K&L Supply allows complete access for front end repairs. (except triple clamp replacement) 1-1/2" plated tubular steel frame. Inserts into triple tree bottom. Adjustable three position holder with removable leverage bar. Note: Pin not included with front end stand. Order per application needed. See application chart on below page.

Front End Stand

              209.95

Ships directly from manufacturer

See below to purchase adapter pin. 

 

Find the part number you need from the chart below and pick it from the drop down box to purchase specific pin for your application. 
Adapter pins for front end stands above

15.95 each except #35-0791 (21.95)

Part Number:

 

Ships directly from manufacturer

 

K&L FRONT END STAND APPLICATION CHART

APPLICATION          Year PIN# K&L P/N Pin Diam. Pin Diam  
                                         mm     thousandths
APRILLA
RS250                       C 35-0789   15.70mm 0.618
RSV1000                     L 35-0799   27.00mm 1.063
BMW
K75, K100                   E 35-0791   19.00mm 0.748
BUELL®
ALL except models below     H 35-0794   14.00mm 0.551
Blast                       D 35-0790   15.65mm 0.616
RS1200                      I 35-0795   16.75mm 0.659
FIRE BOLT             02    M 35-0769   18.75mm 0.738
DUCATI
748 std. model              L 35-0799   27.00mm 1.063
900SS, 750SS                B 35-0788   17.90mm 0.705
Monster, 851, 888           C 35-0789   15.70mm 0.618
Monster S4-916              L 35-0799   27.00mm 1.063
F1-750 Paso                 B 35-0788   17.90mm 0.705
ST2-944, ST4-916            L 35-0799   27.00mm 1.063
HONDA
VTR250 Interceptor    88-90 K 35-0798   22.00mm 0.865
CB400F CB1            89-90 K 35-0798   22.00mm 0.865
CBR600F1~F3 Hurricane 87-98 K 35-0798   22.00mm 0.865
CBR600F4 Hurricane    99-01 K 35-0798   22.00mm 0.865
NT650 Hawk GT         88-91 K 35-0798   22.00mm 0.865
VF750F Interceptor    83-85 K 35-0798   22.00mm 0.865
VFR750R (RC30)        1990  L 35-0799   27.00mm 1.063
VFR750/VFR800         86-00 K 35-0798   22.00mm 0.865
CBR900RR              93-97 K 35-0798   22.00mm 0.865
CBR900RR              98-99 F 35-0792   13.00mm 0.512
CBR929RR              00-01 F 35-0792   13.00mm 0.512
CB900F/CB1100F        81-83 K 35-0798   22.00mm 0.865
RVT1000R (RC51)       00-01 J 35-0796   13.15mm 0.517
VTR1000 Super Hawk    97-00 K 35-0798   22.00mm 0.865
CBR1100XX Blackbird   97-01 K 35-0798   22.00mm 0.865
ST1100                91-00 E 35-0791   19.00mm 0.748
KAWASAKI
EX250F                88-02 K 35-0798   22.00mm 0.865
EX500D                94-02 E 35-0791   19.00mm 0.748
ZX600A Ninja 600R     85-87 E 35-0791   19.00mm 0.748
ZX600B1 Ninja 600RX   1987  C 35-0789   15.70mm 0.618
ZX600C Ninja 600R     88-97 E 35-0791   19.00mm 0.748
ZX600D/E Ninja ZX-6   90-01 A 35-0797   19.00mm 0.748
ZX600F Ninja ZX-6R    95-97 F 35-0792   13.00mm 0.512
ZX600G/J Ninja ZX-6R  98-02 F 35-0792   13.00mm 0.512
ZX750F Ninja 750      87-90 B 35-0788   17.90mm 0.705
ZX750H Ninja ZX-7     89-90 B 35-0788   17.90mm 0.705
ZX750 Ninja ZX-7R     91-95 L 35-0799   27.00mm 1.063
ZX750 Ninja ZX-7RR    96-02 L 35-0799   27.00mm 1.063
ZR750 ZR-7S           00-01 B 35-0788   17.90mm 0.705
ZX900 Ninja ZX-9R     94-97 L 35-0799   27.00mm 1.063
ZX900 Ninja ZX-9R     98-99 D 35-0790   15.65mm 0.616
ZX900 Ninja ZX-9R     00-02 G 35-0807   13.25mm 0.522
ZX1000 Ninja ZX-10    88-90 B 35-0788   17.90mm 0.705
ZX1100 Ninja ZX-11    90-92 B 35-0788   17.90mm 0.705
ZX1100 Ninja ZX-11    93-01 L 35-0799   27.00mm 1.063
ZR1100 ZRX-1100       99-00 B 35-0788   17.90mm 0.705
ZR1200 ZRX-1200       2001  B 35-0788   17.90mm 0.705
ZX1200 Ninja ZX-12R   00-01 G 35-0807   13.25mm 0.522
LAVERDA
650 Ghost/Strike            D 35-0790   15.65mm 0.616
750 Strike                  D 35-0790   15.65mm 0.616
MOTO-GUZZI
Lemans/Daytona              B 35-0788   17.90mm 0.705
1100 Sport                  I 35-0795   16.75mm 0.659
MUZ SCORPION                B 35-0788   17.90mm 0.705
SUZUKI
GSF400 Bandit         91-93 A 35-0797   19.00mm 0.748
GS500E                89-01 K 35-0798   22.00mm 0.865
GSF600 Bandit         96-00 A 35-0797   19.00mm 0.748
GSX600F Katana        88-97 K 35-0798   22.00mm 0.865
GSX-R600              92-93 K 35-0798   22.00mm 0.865
GSX-R600              97-01 G 35-0807   13.25mm 0.522
RF600R                94-96 A 35-0797   19.00mm 0.748
SV650                 99-01 A 35-0797   19.00mm 0.748
GSX-R750              93-95 K 35-0798   22.00mm 0.865
GSX-R750              96-01 G 35-0807   13.25mm 0.522
RF900R                94-97 A 35-0797   19.00mm 0.748
GSX-R1000             2001  G 35-0807   13.25mm 0.522
TL1000R               98-01 J 35-0796   13.15mm 0.517
TL1000S               97-01 G 35-0807   13.25mm 0.522
GSX-R1100W            93-98 A 35-0797   19.00mm 0.748
GSX1300R Hayabusa     99-01 G 35-0807   13.25mm 0.522
YAMAHA
RZ350                 84-85 K 35-0798   22.00mm 0.865
FZR400                88-90 K 35-0798   22.00mm 0.865
FZR600                89-99 K 35-0798   22.00mm 0.865
XJ600 Seca II         92-99 K 35-0798   22.00mm 0.865
YZF600R               94-96 K 35-0798   22.00mm 0.865
YZF600R               97-01 E 35-0791   19.00mm 0.748
YZF-R6                99-00 A 35-0797   19.00mm 0.748
YZF-R6                01-02 I 35-0795   16.75mm 0.659
YZF750R               94-98 A 35-0797   19.00mm 0.748
TDM850                92-93 E 35-0791   19.00mm 0.748
FZ-1                  01-02 A 35-0797   19.00mm 0.748
FZR1000               94-95 A 35-0797   19.00mm 0.748
YZF1000R              1997  A 35-0797   19.00mm 0.748
YZF-R1                98-01 I 35-0795   16.75mm 0.659
FJ1200                86-93 A 35-0797   19.00mm 0.748

 

Index main ] Search ] Tools Tips ]